Subtotal
Taxes are calculated at checkout
Equipment for a fresh start
Roval Rapide Cockpit
×
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It’s the fastest leading edge we’ve ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick... Read More
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It’s the fastest leading edge we’ve ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick... Read More
Roval Rapide Cockpit
RM2,700.00
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It’s the fastest leading edge we’ve ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we’ve ever made, with no compromises. It’s aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory.
AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar’s leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference.
LIGHT AND STIFF: By removing the stem’s hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we’ve ever made.
FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we’ve got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar.
- Aerodynamically engineered to save 4 watts vs a traditional aero road bar
- Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts
- Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm)
- Bend: 127mm drop x 75mm reach, 4 degrees of flare at the drops
- Stem Angle: 6-Degrees, Stem Clamp Diameter: 31.8mm
- Steer Clamp Diameter: 1"1/8, Steer Clamp Height: 40mm (SW Tarmac stem steer clamp height: 31mm)
- Weight: 310 grams (100mm x 420mm)
- Cable Routing: Shimano, SRAM, Campagnolo ( Internal / Electronic Compatible)
- System Weight Limit: 275lbs / 125kg
- Included: Roval bolt-on computer mount: S219900058. Add-on: Tarmac SL7 headset transition spacer: S232500001
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It’s the fastest leading edge we’ve ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we’ve ever made, with no compromises. It’s aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory.
AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar’s leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference.
LIGHT AND STIFF: By removing the stem’s hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we’ve ever made.
FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we’ve got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar.
- Aerodynamically engineered to save 4 watts vs a traditional aero road bar
- Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts
- Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm)
- Bend: 127mm drop x 75mm reach, 4 degrees of flare at the drops
- Stem Angle: 6-Degrees, Stem Clamp Diameter: 31.8mm
- Steer Clamp Diameter: 1"1/8, Steer Clamp Height: 40mm (SW Tarmac stem steer clamp height: 31mm)
- Weight: 310 grams (100mm x 420mm)
- Cable Routing: Shimano, SRAM, Campagnolo ( Internal / Electronic Compatible)
- System Weight Limit: 275lbs / 125kg
- Included: Roval bolt-on computer mount: S219900058. Add-on: Tarmac SL7 headset transition spacer: S232500001
S-Works Power with Mirror
×
The S-works Power with Mirror technology is the perfect reflection of you.
We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened ... Read More
The S-works Power with Mirror technology is the perfect reflection of you.
We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened ... Read More
S-Works Power with Mirror
RM2,025.00
The S-works Power with Mirror technology is the perfect reflection of you.
We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Power Saddle with Mirror is the future.
We developed Mirror technology by 3D printing from a liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually.
And when you combine this technology with our extremely lightweight S-Works Power saddle, with its flexed-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
- FACT carbon fiber shell is flex-tuned for support and ride compliance.
- Ultra-light oversized FACT carbon rails.
- SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.
- Size 143mm / Weight 190g
- Size 155mm / Weight: 194g
The S-works Power with Mirror technology is the perfect reflection of you.
We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Power Saddle with Mirror is the future.
We developed Mirror technology by 3D printing from a liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually.
And when you combine this technology with our extremely lightweight S-Works Power saddle, with its flexed-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
- FACT carbon fiber shell is flex-tuned for support and ride compliance.
- Ultra-light oversized FACT carbon rails.
- SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.
- Size 143mm / Weight 190g
- Size 155mm / Weight: 194g
S-Works Prevail 3
×
The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous sta... Read More
The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous sta... Read More
S-Works Prevail 3
RM1,350.00
The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages.
With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam “bridges” from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made.
When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid “cables” traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet.
The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit.
Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized’s proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings.
For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older.
- AirCage innovation increases airflow.
- Precision, full-wrap polycarbonate shell for increased durability and premium finish.
- MIPS Air Node technology is MIPS’ most ventilation-focused solution.
- Adjustable Tri-Fix web splitter boosts comfort through personalized fit.
- Occipital Base Adjustment optimizes comfort and compatibility with glasses.
The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages.
With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam “bridges” from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made.
When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid “cables” traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet.
The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit.
Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized’s proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings.
For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older.
- AirCage innovation increases airflow.
- Precision, full-wrap polycarbonate shell for increased durability and premium finish.
- MIPS Air Node technology is MIPS’ most ventilation-focused solution.
- Adjustable Tri-Fix web splitter boosts comfort through personalized fit.
- Occipital Base Adjustment optimizes comfort and compatibility with glasses.
S-Works Torch
×
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re... Read More
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re... Read More
S-Works Torch
RM2,025.00
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it.
Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency.
Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer.
Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel.
The S-Works Torch is scientifically crafted to disappear on your feet and off the front.
- New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot.
- Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe.
- By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation.
- An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit.
- Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar.
- Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments.
- Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee.
- Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals.
- Non-slip, replaceable heel tread with internally recessed screws for security.
- *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).
