S-Works Stumpjumper EVO

Part No.: 96322-0201


Interest-free instalments also available with
Hong Leong Bank and Public Bank via iPay88.

Select a Size

Find In-Store

The S-Works Stumpjumper EVO is much more than just a trail bike; it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptab... Read More

wishlist message

Technical Specifications

SWAT Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder
Seat Binder Alloy, 38.6mm
Frame FACT 11m carbon chassis and rear-end, asymmetrical design, 29/27.5 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel
Chainrings 32T
Bottom Bracket SRAM DUB, BSA 73mm, threaded
Shift Levers SRAM Eagle AXS Rocker Paddle
Crankset SRAM X01 Eagle, DUB, S1
Chain SRAM XX1 Eagle
Rear Derailleur SRAM XX1 Eagle AXS
Cassette Sram XG-1299, 12-Speed, 10-52t
Saddle Bridge, 155/143mm, Hollow Ti-rails
Grips Deity Lockjaw
Handlebars OneUp Carbon, riser bar, 5-degree upsweep, 8-degree backsweep, 35mm rise, 800mm, 35.0mm
Stem OneUp, 35.0
SeatPost RockShox Reverb AXS, 30.9, 1X remote, (S1
Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"
Spokes DT Competition Race
Rear Tire Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 2Bliss Ready, 27.5 x 2.3"
Rims Roval Traverse SL 29F/27.5R, hookless carbon, 30mm inner width, 2Bliss Ready, hand-built, 28h
Rear Hub Roval Traverse SL, DT Swiss Star Ratchet, 54t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing
Front Hub Roval Traverse SL, sealed cartridge bearings, 15mm thru-axle, 110mm spacing
Inner Tubes Standard, Presta Valve
Fork FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, S1
Rear Shock FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, S1
Rear Brake SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2
Front Brake SRAM Code RSC, 4-piston caliper, hydraulic disc, 200mm HS2

Epic - Geometry

Geometry

  S1 S2 S3 S4 S5 S6
Crank Length 165mm 170mm 170mm 170mm 170mm 175mm
Handlebar Width 800mm 800mm 800mm 800mm 800mm 800mm
Stem Length 35mm 35mm 35mm 35mm 50mm 50mm
Saddle Width 155mm 155mm 143mm 143mm 143mm 143mm
Seatpost Length 100mm 125mm 150mm 170mm 170mm 170mm
Stack 613mm 617mm 626mm 635mm 644mm 654mm
Reach 408mm 428mm 448mm 475mm 498mm 528mm
Headtube Length 95mm 95mm 105mm 115mm 125mm 135mm
Headtube Angle 64.5deg 64.5deg 64.5deg 64.5deg 64.5deg 64.5deg
BB Height 335mm 340mm 340mm 340mm 340mm 340mm
BB Drop 40mm 35mm 35mm 35mm 35mm 35mm
Trail 131mm 131mm 131mm 131mm 131mm 131mm
Fork Length (full) 561mm 571mm 571mm 571mm 571mm 571mm
Fork Rake/Offset 44mm 44mm 44mm 44mm 44mm 44mm
Front Center 732mm 756mm 780mm 809mm 838mm 873mm
Chainstay Length 436mm 436mm 436mm 436mm 446mm 446mm
Wheelbase 1165mm 1189mm 1214mm 1245mm 1283mm 1317mm
Top-tube Length (horizontal) 538mm 564mm 590mm 623mm 647mm 679mm
Bike Standover Height 733mm 764mm 763mm 762mm 767mm 770mm
Seat Tube Length 385mm 385mm 405mm 425mm 445mm 465mm
Seat Tube Angle 78deg 77.6deg 77.2deg 76.9deg 77deg 77deg
Max Seatpost Insertion 180mm 180mm 200mm 220mm 240mm 260mm
Min Seatpost Insertion 80mm 80mm 80mm 80mm 80mm 80mm

Geometry

Geometry Chart